Use the cutter after you attach it and adjust the cutting position. Normal Cut is selectable only when printing with No Margins selected. By cutting twice, an 18 mm slip of paper is left. In this mode, the space between images is extended and the paper is cut twice inside this space. If you have selected Paper-Saving Cut and are unhappy with the gap of the cutting position, select Normal Cut. However, the cutting position may shift slightly. The paper is cut at the boundary between images (the boundary between pages). Select the types of cutting from the Auto Cutter box. Off the paper at the back of the printer, then turn off the printer. Wait until the printer stops printing and feeding paper. If you have already started printing,Ĭancel the print job from the printer software referring to Cancelling When roll paper is loaded in the sheet feeder. Select Roll for Paper Source, and select the appropriate pageĭo not select Sheet as the Paper Source setting in the printer software
In many applications, you can select Print directly from the File menu, then access the printer software by clicking the Properties button. Open the file you want to print in the appropriate application.Īccess the printer software from within the application.įor details on accessing the software, refer to the application's user manual.
Minimize Margins or Centered settings, or use the functionsĭo not select PhotoEnhance in the printer software, as this may cause your printout to have gaps.Īfter the roll paper is loaded in the printer, follow the steps below to configure your printer software for printing. When printing on roll paper, you cannot use the Reverse Order The steps from the printer driver settings to cutting are as follows. The following describes how to print on the roll paper using the cutter. How To / Using Automatic Roll Paper Cutter
0 kommentar(er)
